How to Make a Hanging Herb Garden Planter

Mark and carefully cut the 1x6 into two 31˝ pieces, using a miter or circular saw.

Tip: If using these projects outdoors where contact with water could occur, use either pressure-treated, cedar or redwood boards depending on availability.

Next, draw a line straight down the center of one of the boards. It should be about 2 3/4 inches from the edges.

Make a mark on the line 5 inches from the end of the board, then at 12, 19, and 26 inches

Using the four marks you made on each board, drill four 4-inch holes in each board. Make sure to work off the edge of your work surface to avoid damaging it. Clamp the board down tightly to the workbench.

Now, measure in 1 inch from each corner edge and side. Use these marks to drill four 5/16-inch holes in each board.

Now’s the time to paint or stain your boards if you like. Be sure and give them plenty of time to dry.

Cut the 16-foot rope in half. Run each one down, under, and up each end of the bottom board, making sure to keep the board exactly centered. Measure and make a mark 12 to 14 inches up each side of the ropes and tie a knot.

Now you can slide the top board down the ropes to rest on the knots, and tie the ends together.

Find a suitable spot for your garden, and screw in the J hooks. Set them 29 inches apart into a solid beam or overhang.

Fill the pots with potting soil and your choice of herbs or veggies. Then pop them into the holes and you’re done.