Return this item within 90 days of purchase.
Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
SAKRETE Top'n Bond Concrete Patcher is a polymer modified sand cement repair mortar requiring only the addition of clean potable water. It is for applications from 1/2 in. (13 mm) to feather edge and can be used for refinishing, patching and general repairs to concrete/masonry. Sets in as little as 30 minutes.
Product Depth (in.) | 8.75 in | Product Height (in.) | 6.75 in |
---|---|---|---|
Product Length (in.) | 8.75 in |
Color Family | Gray | Color/Finish | Gray |
---|---|---|---|
Drying Time (hours) | 24 | Features | Pre-Mixed, Stainable |
Interior/Exterior | Exterior | Product Weight (lb.) | 10 lb |
Recommended Application | Concrete | Repair Type | Patch |
Returnable | 90-Day | Use Location | Floor |
Manufacturer Warranty | 1 YR |
---|
David. No. Top N Bond does not have enough open time to coat a patio. Please contact us directly at 1-866-SAKRETE (866-725-7383). So, we may gather more information to assist you with your project 1-866-725-7383
David. No. Top N Bond does not have enough open time to coat a patio. Please contact us directly at 1-866-SAKRETE (866-725-7383). So, we may gather more information to assist you with your project 1-866-725-7383
No, it is not designed for that use. Mike
-Ceejay, no, this would not be a recommended application for Sakrete Top N' Bond. Should you have any questions or concerns going forward with Sakrete products, please call us at 1-866-SAKRETE.
Ceejay. Top N Bond does not have any flowability for molding. It may not reflect or show any features of the mold when de-molding. As you know. In most cases when molding it's trial and error. Please contact us so we gather a bit more information on what the mold is and to discuss possible product options. 1-866-SAKRETE (866-725-7383).
Should the repair be horizontal using Top N Bond at 1.5" in depth. It can be done in 1 lift/layer. Top N Bond can be applied at 2" inches in depth. Typically, the rule of thumb is to add another layer in 24 hours or wait for 28 days for a full cure. In most cases with materials that have an earlier set time or fast setting repair materials. A second layer can be applied when the first application has become hardened that the surface cannot be disturbed. Should you want to discuss this in more detail or have any other questions. You can contact our technical department directly at 1-866-SAKRETE (866-725-7383).
Phyllis, no, Top'n Bond is not a flexible material. Should you have any other questions, please contact us directly at 1-800-SAKRETE.
-Phylis, no Top 'N Bond is not a flexible material. It is wearable and would crack overtime with concrete slab shifting and weather as well. We would recommend using a polyurethane caulk that allows more flexibility and either weather/waterproofing or water resistant. Should you have any questions, please contact our Technical Support Team at 1-866-SAKRETE.
-Bryan, unfortunately no. The substrate must be free of any loose debris, paints, oils, sealants and any other bond breaking materials. Should you have any questions, please contact us at 1-866-SAKRETE.
-Chuck, no we do not recommend using Sakrete Top 'N Bond for this application. Should you have any questions, please contact us at 1-866-SAKRETE.
-JJ57, when stored in the proper climate and container this product has a shelf life of 1 year from purchase date. Should you have any questions, please contact our Technical Support Team at 1-866-SAKRETE.
-Rich, unfortunately, no Sakrete Top N' Bond is not a resurfacing product it is for repair. We do not recommend this product for your application. Should you have any questions, please contact us at 1-866-SAKRETE.
Viewing 1-8 of 112
4.6 out of 5