Return this item within 90 days of purchase.
Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Multi-Purpose Reducer is used to transition floors of unequal height from wood/laminate floors to carpet, vinyl or tile. This molding will provide a seamless look when transitioning between flooring surfaces. Provides a beautiful finished look to any room in your home.
Product Length (in.) | 72 in | Product Thickness (mm) | 8.47 mm |
|---|---|---|---|
Product Width (in.) | 1.8125 in | Width (in) x Length (in) | 1.8125in x 72 in |
Color Family | Brown | Color/Finish | Essential Oak |
|---|---|---|---|
Features | Mark Resistant | Flooring and Tile Look | Wood Look |
Flooring Product Type | Vinyl Moulding/ Trim | Indoor/Outdoor | Indoor/Outdoor |
Material | Vinyl | Pieces Per Case | 1 |
Product Weight (lb.) | 1.5 lb | Returnable | 90-Day |
Water Protection | Water Resistant |
Certifications and Listings | No Certifications or Listings | Manufacturer Warranty | 25 Year Residential, 8 Year Commercial |
|---|
Hi Heather, you may want to reach out to Home Depot to see which pieces they have to coordinate with this flooring, specifically Performance Accessories is making the trim pieces for this floor now. Thanks and good luck with your project!
I bought some heavier duty concrete anchors - 2” is plenty. I also used some construction adhesive - but that’s not really necessary. Most important thing is to not over-tighten the anchors to the point that the track warps
Small cement anchors 1/4” with 10/1 screws along the threshold. 4 anchors evenly spread across u channel. Line up strip and tap into place.
The vinyl trim is now available to order on-line. You may need to refresh your browser.
All Zamma metal tracks are 1/2" Wide.
Unnecessary for my product use. However a 6 foot length is a standard for this product.
Hi Phil. The product is only available in a 72 inch length; however, the product and supporting Snaptrak can be cut shorter to fit any need.
I used a table saw it worked out great.
This was done by a handyman and not one of them shattered. It's perfect!
No idea if they will shorten them or sell smaller ones but is honestly be more happy with a longer one. Leaves room for error if I mess up my first cut I get a second chance. Or I could use one piece for 2 doorways.
NOT unless there is enough consumers,request it, or demands it.
I have identical floors [ I took out carpet] and it will fit the 5/32 to 3/8 difference. I don't know about 1/8 in. It may rock a bit but I THINK it will be no problem and it will look good
Viewing 1-8 of 17
4.4 out of 5
