Questions and Answers for Home Decorators Collection Reagan LED II 52 in. Brushed Nickel Ceiling Fan

A:  No indoor only, it is not designed to withstand all elements outdoors.

A:  You need to change the frequency code on both remote and receiver. It could be that it is picking up a signal from another electrical device. You may also contact customer service at 1-877-902-5588 for assistance.

A:  a neighbor might have a device on the same type remote if it continues change the code

A:  Another remote with the same frequency would turn the light and the fan off or on. The code in the remote and the code in the fan housing can be changed by simply moving one oh the presets on both of them. Make sure they match as to which one of the four switches you change.

A:  Home Depot customer service was very helpful and sent me a replacement LED kit ($46). That didn't fix the problem, so they sent me another LED kit and a new remote receiver. That didn't work either. I troubleshot the issue to the LED Driver (Step down transformer) mounted inside the fan motor housing. Home Depot did not have this part, so they put me in touch with Hampton Bay, and they were able to get me a new LED driver ($15). Fairly simple to wire in and now the light works like it used to! Only took 5 weeks.....

A:  The replacement is available by calling customer care at 1-877-902-5588.

A:  according to the sales person when I purchased, the 'bulb' should outlast the life of the fan. If it isn't working at all, supposedly you should contact the maker and get a replacement.

A:  Yes, the instructions will be on page 7 of the owners manual.

A:  yes. I didn't use it. my ceiling has a very slight slope and we just put washers on with the screws which could make it level. fabulous fan!

A:  Yes, this can be flushed mounted.

A:  Hi Babs, yes it can be mounted close to ceiling! Distance from ceiling to the bottom of the fan is 10 inches. Hope this helps? Mike

A:  Yes, it offers this option in the instructions

A:  Yes, this model can only use the original bulb.

A:  This model can only use the original light it comes with.

A:  Yes, it will work for the Reagan II fan.

A:  Three speeds, high, medium and low

A:  Unfortunately not, the speeds are built in and do not change with remotes

A:  Yes, this can adapt to a longer rod and slope kit. LEAD WIRES are 54"

A:  Yes, my ceiling is sloped and it worked fine. You can also add a down rid if you need it.

A:  looks like teak but i sure its not make sure screws are in tight for fans so it won't vibrate

A:  This has an AC Motor. low speed uses 11w(.26 amps), medium 25w(.34 amps), and high uses 44w.(.40 amps) These are approximate measures. They do not include amps and wattage used by the light kit.