Customer Reviews for Suncast Tremont 8 ft. 4-1/2 in. x 10 ft. 2-1/4 in. Plastic Storage Shed

Had 35 mph gusts to 45 and let the pics tell it all. With the other reviews, this one must be a Covid made shed!!!!!!!

I am 71 years old 5 feet 5 inches tall.. The day I picked up the shed I did all the prep work took about hr and half.. Next day I assembled the shed by myself.. Took me about 5 hrs.. Directions were great and well organized.. Shed was put on cement pad.. All parts lined up.. If I can do it alone at my age should be no problem for others... Just follow the directions.. Looks great and my Goldwing Trike fits in it.

Purchased a smaller shed, BMS6510 in 2015 and by 2018, the corners cracked and let go. Suncast sent me four replacement corners which again in 2013 cracked and let go. They would not replace the corners and responded "Unfortunately, a proper foundation as described in the assembly manual is requirement per the terms of our warranty". The shed is sitting on a solid wood deck.

We are happy with our Suncast Tremont storage shed.

I didn’t put it together I had someone put it together for me. I love the space inside it fits a adult 3 wheeler bike, a adult 2 wheeler bike, lawnmower, whipper snipper, large chairs, garbage can and plenty of room to move around.. it’s much larger inside than it looks.

I purchased this shed on 2/17/2019, and now (actually) over a year ago, the corners of the shed are splitting and leaving a big gap. After only a couple of years, and the shed is useless. I am very disappointed because not only of the cost but also the effort and time spent putting this shed together. Will never buy Suncast sheds anymore.

The shed was great but you replacement skylights every 5 years or so from deterioration . The company sent me the wrong gaskets and I can’t get the new skylights to screw down.

Easy to put together and I can store a lot in this shed, more than I expected. Make sure of doing a good solid floor as described in the instructions. The shed has been recently installed and has not went through a winter yet, but I feel it will be good as long as I make sure not too much snow build up on its roof.

We read hundreds of reviews, watched a dozen videos and still bought this shed. Delivered on time, 2 huge boxes on pallets. We build our shed on a foundation of paving stones. Build was easy except 1 window on the front door just refused to fit. The pre-drilled holes on the plastic window did not line up with the spots on the resin frame. 2 hours wasted, we will have to seal with caulking. Besides that, everything came in the boxes. Instructions were clear. Every step had its own little baggy of hardware. Definitely need 2 people, 3 would have been best. Followed the steps in the instruction, easy peasy.

I would recommend first watching some YouTube videos about developing a game plan to install this shed. People have helpful YouTube videos about building this exact shed. Once I opened the box and laid out all of the pieces on the grass, I first started by installing all of the components for the doors, roof windows and joists/trusses for the roof support. This allowed me to have enough done by myself before my help arrived to build the rest of the shed. I then had the help of 2 other people for the install once the prep work was done. Once the prep work was done, it took us about 3 hours to build the shed. Prep work: 2-3 hours Build shed: 2-3 hours Shed base: 3-4 hours I built a wood base for my shed with 2’x8’x12’ (quantity 6) with concrete deck blocks for support. I then used 3/4” plywood on top. Make sure all of the lumber is pressure treated. Once the base was built, I painted it with an exterior paint. I wanted to have a wood platform as opposed to a gravel base to make sure that the shed was safely secured to it. I bought 8-10 lag screws with washers to anchor the shed floor to the platform. Overall, I am very pleased with the sheds size and quality. It is definitely a 2-3 person job to assemble the shed.

I would’ve steered clear of this had I known it was HDPE (high density polyethylene). Think little tikes and milk cartons, that’s HDPE. It’s just far too flimsy for something structural like a shed. Screws easily strip out the HDPE. There are gaps, cracks and daylight showing through in dozens of areas. You push on the back wall and the whole structure moves like a jello mold. The doors don’t close without pushing up on the headed above the. Perfectly level and built on a super sturdy 2x6 sub floor with 3/4” plywood.

Easy to assemble but definitely a 2 person project. Very pleased with sturdiness of building.

This is a good quality storage,easy to assemble.

Overall satisfied. Looks good, fits together good but instructions need improvement. Be sure to have a good foundation. Mine is wood with 3/4” plywood, worth the nice floor that comes with the building it looks good and super sturdy

I love my shed!! One minor glitch as there was one wrong roof panel in the box but we were able to build it regardless and then installed the final piece when it arrived in about 7 days. We bolted it to the cement pad thankfully as we had the worst wind storm EVER The shed stayed put including the roof tiles. I put power in it with a receptacle and small light Great brightness even without it. I am so pleased with this purchase.

The shed was quite easy to assemble. Definitely need two people however. Structure is solid. I am sure the roof will have no issues with the weight of a heavy snowfall.

Recently purchased 2 of these sheds, and was impressed with how well they went together. Made wood bases prior to the sheds arriving based on the dimensions from the manual (PDF copy obtained from the manufacturers website), and this enabled the sheds to each be completed in a day. Once all the pre-assembly is done, final construction only takes ~ 3hrs. Highly recommended to follow the instructions as there are a lot of components. For the bases, ran the joists opposite to what is shown on the instructions. I did this as i secured the wood base to (3) treated 4x4s. For the joists i used treated 2x6s, and top the frame with 3/4" T&G plywood. The treated 4x4s are sitting on 3/8" pea stone. The only assembly issues i ran into were with the windows in the doors. Was doing the pre-assembly by myself, so found it was easier to lay the window frame down on a flat surface, then put on the "glass" (clear plastic window), and then lay the door onto it. Also pre-drilled out any of the holes that had plastic in them (helps with alignment). Only improvements i can see doing is putting a stiffener brace on the rear wall, and there is a slight gap where the gables meet the walls where i will put some caulking.

Great size and great price. Make sure the ground is flat. Or build a platform. I built a platform after it was built and was able to slide it on myself it is fairly light for the size

Nice looking shed,assembly was pretty straightforward ,took a full day to do working on my own

Product looked okay online. Trouble is that a 7ft piece that held the roof together properly was missing, and some hardware for it as well. I contacted the manufacturer and was told the part would be shipped right out but would take up to 10 business day for delivery. Perfect for someone with a half a built shed. (I know I could of laid all the pieces out before hand but really, unpacking everything first, takes a lot of space and time, then cross reference with the manual.) Replacement part didn't arrive after 2 weeks. Contacted the company and said it would be up to another two weeks because they had to get the part made!!?? When the part did show up, it was definitely not new. Has scratches on it and rust on the inside. Can we say used!!!! Maybe returned, or from a demo unit!! Shed was also supposed to keep bugs out.... Yeah I can see daylights for days all around where the roof and sides come together. I do not recommend this shed to anyone, it any other product of theirs. Take a look at their Facebook page and you will see. I have had the product for 4 months, 3 before it could be completely assembled. It is sturdy, but the company behind it has its own issues.

It was really easy to assemble. It took us only 6 hours for two people to completely asseble it. All parts match precisely. We've had several heavy rain episodes so far and no leaks detected. Very durable material and price was very affordable compared to other brands. We are happy with it.

We LOVE our new shed!! We opted to have Home Depot installation services assemble it and it only took a few hours for the 3-person team. It is a very sturdy product (for a plastic material) and looks really nice. Because of the slope of our backyard, we had to pour up to three feet of concrete on the backside of the platform to make it level. The price of the concrete slab was actually more than TWICE the price of the shed. However, we did not regret doing it because everything came out so nice and level. The 8' x 10' size was perfect for what we needed it for as well. We also purchased 6 plastic storage shelving units from Home Depot and they fit inside perfectly along the walls, creating lots of storage space. We are very pleased with this purchase and highly recommend this shed!

I like this shed, 70% easy to assemble. Poor fitting roof panels.

I love my new shed. It has plenty of room for everything. I was able to assemble most of it by myself but needed a bit of help with the roof. We had tons of snow last year and the roof on my last shed caved in. Ill have to wait and see how this one does rhis winter.

Once I built the sub frame foundation delivery was on time all the parts were there easy to assemble very good product I would definitely recommend this shed

It takes at least two people to assemble. Good product. Only problem was that there was no adjustment on the doors and we were about 1/4 inch out on the alignment. We will have to lift the right door to match the locks.

Despite having to wait a week for a missing joiner, the shed was straight forward as far as assembly. Instructions were vague at times but overall easy to follow. Took about a total of 6 hours to put together with two people. Actually split the assembly into two days. Ended up loving it once it was put together. Stands sturdy and looks great to color scheme to my house. If you have a low torque/speed drill may come in handy to save your hands and forearms from all the screwing at the end with the roof. Added bonus , the wife loves it! Seems durable and in for the long haul.

I have had this shed for 5 months now. It is being used by my mother-in-law for all her gardening tools and storage. I put stand-alone shelves inside, being plastic, I think attaching them to the walls wouldn't work. Following the instructions made this fairly easy to construct. The wood foundation instructions really helped. It is not a job to do without help, as the instructions say.

we bought this shed about a month ago. took just over 2 days to put together for 2 people. we love the look, the space. We did have some trouble with the doors. we had a deck built for it and installed it on the deck, Now it's late Nov. and we have noticed the front of the shed walls have buckled. We don't know why. It is level not sure what has caused this? Any one out there have the same problem?

I installed the whole shed myself except roof panels Instructions and procedures are simple ONLY CONCERN : one of the door wasn’t closed properly, rain water leak inside