#1 Home Improvement Retailer

Internet # 100038668

Model # 845000

Store SKU # 845000

Store SO SKU #845000

2 in. x 3 in. x 96 in. Select Whitewood Stud

  • Use studs for new home construction or renovation projects
  • For interior or exterior use - can be painted or stained
  • Ideal for framing, houses, barns, sheds, and other structures
  • View More Details
Store
0 in stock

Product Details

About This Product

Every stud meets the highest grading standards for strength and appearance. Framing studs are ideal for a wide range of uses from framing of houses to basic interior structural applications. Studs come in several widths for structural framing, structural walls, interior and exterior walls. As long as studs are properly primed and painted or sealed and stained they can be used in exterior applications.

Highlights

Product Information

Internet # 100038668

Model # 845000

Store SKU # 845000

Store SO SKU #845000

Specifications

Dimensions

Actual Product Length (ft.)

8 ft

Actual Product Thickness (in.)

1.5 in

Actual Product Width (in.)

2.5 in

Nominal Product H x W (In.)

2x3

Nominal Product Length (ft.)

8 ft

Nominal Product Thickness (in.)

2 in

Nominal Product Width (in.)

3 in

Details

Fastener Recommendation

N/A

Features

Paintable, Stainable

Lumber Grade

Stud

Material

Wood

Moisture content

KDHT

Texture

Smooth

Wood Species

Spruce/Pine/Fir

Warranty / Certifications

Manufacturer Warranty

See store for details

Questions & Answers

49Questions
caret
Q:How much does 1 board weigh in how many lbs
by|Apr 10, 2024
1 Answer
Answer This Question

A:  6 lbs

by|May 30, 2024
    1 found this answer helpful
    caret
    Q:Can I get Home Depot to rip 1/4" off of these?
    by|Mar 8, 2024
    1 Answer
    Answer This Question

    A:  please contact your local Depot Store to confirm.

    by|Mar 11, 2024
      caret
      Q:Can I use this to create an outdoor decorative frame or wall frame for an outdoor party?
      by|Sep 19, 2023
      1 Answer
      Answer This Question

      A:  yes, as long as it's not used structurally to hold up weight.

      by|Sep 20, 2023
        caret
        Q:I want to stain first then after stain I want to use a good exterior wood sealer over the stain. What exterior stain and what sealer will work together? Will this 2 in. x 3 in. x 96 in. Select Whitewood Stud accept and absorb an exterior stain?
        by|Aug 13, 2023
        1 Answer
        Answer This Question

        A:  yes it will accept any kind of stain. you can use any type of decking stain and sealer on these

        by|Aug 14, 2023
          Showing 1-4 of 49

          Customer Reviews

          3.9 out of 5

          • 3.9 out of 678 reviews
          • 75% recommend this product
          Filter by:
          Showing 1-10 of 678 reviews
          I used this for display rack project for my church. All the wood was straight with minimal knot holes. I sanded it down, covered it with a coating of Zinsser primer for the knot holes and spray painted the wood with some Rust-oleum decorative paint.
          by
          • Verified Purchase
          Used these for our deck railings. The project came out beautiful!
          by
          • Verified Purchase
          Had it cut into 4 pieces of 13 inches used for used for legs for my bed board It was perfect
          by
          • Verified Purchase
          Project was a success...I was worried about ordering online and picking up curbside but they pull...
          Project was a success...I was worried about ordering online and picking up curbside but they pulled/bundled good product (not cracked, twisted junk) and had it tied neatly together for pickup.
          by
          • Verified Purchase
          • Recommended
          1 found this review helpful
          Good wood
          Good wood
          by
          • Verified Purchase
          • Recommended
          Great lumber, these can be used for studs, shelving, fence backer rails or any project where you ...
          Great lumber, these can be used for studs, shelving, fence backer rails or any project where you need strength but with a little less strength, cost and size compared to a 2 x 4. I have also used these to create walls between tubs and showers for plumbing to save some space and money. I used these extensively in my shed for the walls and shelving. As with any lumber, you need to pick through the pile for good pieces. These are kiln-dried with <20% moisture but will still dry out a little further. Before they dry out further they take nails and screws well, after you may need to pre-drill holes. They are not sanded and are of general rough lumber quality. They can be stained or painted if need be. The type of wood (different from store to store) is either spruce, pine or fur. These are not pressure treated and should not make contact with the ground or they will rot.
          by
          • DIY
          • Recommended
          8 found this review helpful
          Bought a bunch of this along with some OSF to build some garage shelves. I found good unwarped p...
          Bought a bunch of this along with some OSF to build some garage shelves. I found good unwarped pieces and the wood worked as advertised.
          by
            • Recommended
            Yes the 2in. x 3in. x 96in. Select Kiln Dried Whitewood Stud met my expectations. Sure enough, it...
            Yes the 2in. x 3in. x 96in. Select Kiln Dried Whitewood Stud met my expectations. Sure enough, it measured 2" x 3" x 98" and I liked that it seemed to have been dried in a kiln, however, I wouldn't rule out a low temperature oven. I bought 8 of them for a project that needed my immediate attention. They have been sitting in my garage for 2 weeks now. They still look pretty straight. Rock On Home D! (disclaimer, actual dimensions were 2 1/2" x 1 1/2" x 96) See optional photo
            by
            • Verified Purchase
            • Recommended
            2 found this review helpful
            Works great for smaller framing jobs!
            Works great for smaller framing jobs!
            by
            • Verified Purchase
            • Recommended
            2x3’s are usually bowed and twisted in the store and are usually damp to the touch. They are not ...
            2x3’s are usually bowed and twisted in the store and are usually damp to the touch. They are not dried in the kiln long enough. I pick the straightest ones then install immediately before they can warp. Only use them when absolutely necessary. I realize they’re from new growth trees but they there must be a way to make them more stable.
            by
            Response from JD IRVING PRODUCT SUPPORTMay 7, 2018
            Thank you for your review. We truly appreciate and value your feedback.
            Expansion, contraction, twisting, warping, cracking, cupping, splitting, bowing; These are all -natural characteristics of kiln-dried wood when the internal moisture content % has changed. Our product originates in a northern climate. Though it is still kiln- dried, wood is similar to a sponge and it will either take on additional moisture or dry out in warm dry air climates.
            If the product has been stored inside a warm dry climate like a store, for an extended period the characteristics outlined above will occur. It is in this regard wood is no different than any perishable item found in a supermarket.
            We are working with the Team at Home Depot to assist in the important daily inventory management and merchandising of our products to improve the quality of the product you purchase. JDIRVINGHAPPYBROOK
            • Verified Purchase
            12 found this review helpful
            Showing 1-10 of 678 reviews

            Compare Similar Items

            current item

            Nominal Product H x W (In.)

            2x3

            2x4

            2x4

            Nominal Product Length (ft.)

            8 ft

            8 ft

            9 ft

            Lumber Grade

            Stud

            stud

            stud

            Features

            Paintable, Stainable

            Paintable, Stainable

            Paintable, Stainable

            Fastener Recommendation

            N/A

            N/A

            N/A