#1 Home Improvement Retailer

Internet # 325708724

Model # 56513241-8PK

8-Pack 4 ft. 3600 Lumens Motion Sensing LED Wraparound Ceiling Light Garage Light Laundry Room Bright White 4000K

Includes 8 fixtures
$423.09
($52.89 /fixture)
Apply Now
Pay $373.09 after $50 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Use motion sensor for hands-free activation and convenience
  • Detects motion up to 13 ft. with customize hold times to 10 min
  • Garage, laundry room, basement, workbench, work shop, storage

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Get an immediate answer with AI

AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.

Product Details

About This Product

Commercial Electric 4ft. Low Profile LED Wraparound Light with Motion Sensor conveniently turns on simply by walking into the space saving you the hassle of feeling around for a pull cord or wall switch. No more being frazzled looking for the wall switch or walking into a dark closet or garage. You customize the motion sensor to adjust hold times and it detects motion emitted by infrared energy in the form of heat up to 13ft. away. Our motion sensing wraparound light emits crystal clear 3600 Lumens of brightness using only 40-Watts of power, saving an estimated energy cost of $4.82 per year. It is easy to install and maintenance free with no bulbs to replace. Great for garage, workbench, storage room, utility room, walk-in closet, basement, craft room, retail office.

Highlights

  • Built-in PIR motion sensor detects motion emitted by infrared energy in the form of heat
  • Adjustable Hold Times: 2 minutes / 10 minutes or disable
  • Detects motion up to 13ft. - Recommended mounting height is 10-19ft.
  • Replaces two 32-Watt fluorescent bulbs
  • 3600 Lumens of brightness using 40-Watts of electricity
  • 4000K Bright White color temperature of light output
  • Non-Dimmable
  • Operates reliably in sub-zero applications down to -4°F up to 113°F
  • Product Dimensions: 48in. L x 5in. W x 2.17in. H - Weight: 3.53 lbs.
  • Maintenance free with no need to replace bulbs
  • Rated life up to 50,000 hours
  • 5 year warranty
  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Product Information

Internet # 325708724

Model # 56513241-8PK

Specifications

Dimensions

Product Height (in)

2.17

Product Length (in)

48 in

Product Width (in)

5

Details

Actual Color Temperature (K)

4000

Color Rendering Index (CRI)

80

Color Temperature

Bright White

Color/Finish

White

Color/Finish Family

White

Damp/Wet Rating

Dry Rated (Indoor)

Dimmable Capability

Non Dimmable

Features

Occupancy Sensor

Included

Mounting Hardware

Light Bulb Type Included

Integrated LED

Location Use

Garage, Office, Warehouse

Lumens

3600

Material

Polycarbonate

Package Quantity

8

Power Source

Hardwired

Product Length (ft)

4 ft

Product Weight (lb.)

3.53 lb

Product Width (ft)

0.42 ft

Recommended Mounting Height (ft.)

12 ft

Returnable

90-Day

Voltage (V)

120 V

Wattage (W)

40 W

Warranty / Certifications

Certifications and Listings

ETL Listed, FCC Listed

Manufacturer Warranty

5 years

Questions & Answers

Is this lights will works in stairways and how far motion detected
ByMay 14, 2025
0 Answer | 
Answer This Question

Does it work in a cold garage
ByMay 12, 2025
0 Answer | 
Answer This Question

I assume the light stays on as long as anybody is in the room
ByDec 23, 2024
1 Answer | 
Answer This Question

Yes, the light will stay on as long as motion is detected. The hold time is adjustable from 2 to 10 minutes, or you can disable the motion sensor altogether. The motion sensor detects heat emitted by infrared energy up to 13 feet away.

By|Jan 30, 2025
0/0


Does this come in a 2ft size?
ByOct 30, 2024
1 Answer | 
Answer This Question

Hello Chris, Unfortunately we don't have a 2ft motion wrap light similar to this fixture. We do have a 40" motion shop light part number 55701142. We appreciate your question.

By|Dec 4, 2024
    0/0


    Can this fixture be joined to an identical fixture to make a 8ft
    ByAug 2, 2024
    1 Answer | 
    Answer This Question

    Hi GRam. Thank you for your question. No, this fixture is not linkable.

    By|Aug 28, 2024
      0/0


      Can the motion sensor be turned off such that this only turns on and off with an electrical wall switch?
      ByJul 16, 2024
      1 Answer | 
      Answer This Question

      Hello Faizan, There is a disable option. If you're having motion sensor issues, please contact After Sales Dept 855-384-7754 for assistance.

      By|Aug 27, 2024
        0/0


        can the motion sensor be shut off
        ByMay 21, 2024
        1 Answer | 
        Answer This Question

        Yes, the motion sensor on the Commercial Electric 4 ft. 3600-Lumens Motion Sensing LED Wraparound Ceiling Light can be disabled. The product details indicate it has adjustable hold times, including a disable option.

        By|Jan 31, 2025
        0/0


        My current fixtures are being control with a timer in the evenings. Can this light be used with a timer?
        ByMay 2, 2024
        1 Answer | 
        Answer This Question

        This light fixture has a built-in motion sensor, offering the convenience of hands-free activation. It also has adjustable hold times (2 or 10 minutes) or the option to disable the motion sensor entirely. When the motion sensor is disabled, the light can be controlled manually by a wall switch, which would allow you to use an external timer to control the light in the evenings.

        By|Feb 1, 2025
        0/0


        Viewing 1-8 of 27

        Customer Reviews

        4.6 out of 5

        • 4.6 out of 95 reviews
        • 94% recommend this product
        What Customers Say
        Summarized by generative AI from text of customer reviews

        Customers say the Commercial Electric 4ft Motion Activated LED Light is a highly effective lighting solution, providing 3600 lumens of bright white light with a 4000K color temperature. Users appreciate the ease of installation, lightweight design, and the convenience of the adjustable motion sensor settings. While many find the motion detection feature reliable, some have experienced minor issues with the sensitivity and lens installation. Overall, it is well-received for its performance in various settings such as garages, closets, and utility rooms.

        Filter by:
        Showing 1-10 of 95 reviews
        Bright and easy to install!!! Perfect for any size room
        We all love this awesome light! It was perfect to light up our attic storage area. It was every easy to mount and the directions to wire up were easy to follow. The light brightness is just perfect for the large attic area. The motion sensor feature is also fantastic but in the end we decided to just leave it in the on position and used a regular light switch to power the fixture. One of the best upgrade decisions we made in that attic area.
        by
        • Recommended
        4-foot Motion Light
        The Commercial Electric 4 Foot Motion Sensing Strip Light is a simple and convenient way to have lighting go on automatically by just install 1 product. The built-in motion sensor works pretty well, however it could be more sensitive. The LED strip light is 3600 lumens and is very bright. It is simple to install with the fixture being pre-wired for just 3 wire connections. Hot, Neutral, Ground, and you are good to go. The light fixture comes complete with wire nuts, screws and anchors for a quick mounting. The lens is a milk white plastic lens that diffuses light in all directions. The built-in motion sensor has adjustable times from disable, 2 minutes, or 10 minutes. The finished lens can be challenging to install as it is a tight fit so take your time. One end of the fixture has a slide clip to hold the lens in place, be sure to use it.
        by
        • Recommended
        Just set it and forget it
        CE motion sensor light. You just install it and it takes care of the rest. I had an old 4 ft fixture with a timer switch in a laundry room. This light replaced the switch (with a blank cover plate), and the light. Easy to install. All parts included. Best installed on a finished ceiling with a round electrical box in place. The motion sensor is on one end of the fixture so be sure that faces closest to the doorway of the room. The light also has an adjustment for how long the light stays on after motion (2 minutes or 10 minutes). Because it is LED, it does not use much power so I set mine to 10 minutes. It will occasionally go on during the daytime hours, but usually not. 4 ft so it works in small to mid-sized rooms. 3600 Lumens so it has enough light. 4000K color so it is bright white color.
        by
        • Recommended
        Perfect light
        I found the perfect spot for this light. Due to the high wind that always blows into the front of my shop quonset, I built a four by four foot mudroom with the door facing away from the wind. I had a light out there but this light is absolutely perfect because I can set the timer so it is on for 2 minutes. The motion detector picks up when either door is opened and it is bright enough to prevent another fall on the driveway when it is icy. Love it!
        by
        • Recommended
        Very Slim Low Profile Fixture
        This fixture has a very low profile. It is 42 inches long, 4-3/4 inches wide and 1-3/4 inches high. It is a hardwire fixture. The mounting screws are provided. The light output is 3400 lumens and uses 34 watts. The light temperature is 4000k, which is on the cool side of the spectrum. It doesn’t get attached to the electrical box. It is mounted with screws through the keyholes in the ends of the frame. Drywall anchors are included. Only the electrical wires are attached to the house wires inside of the electrical box.
        by
        • Recommended
        Commercial Electric Low Profile 4 ft. LED White Wraparound Light with Motion Sensor
        This light is easy to install, is lightweight, bright, no flicker, no heat or noise, and a neutral in color. Although the stamped metal feels sturdy enough, the defuser lens feels very thin. I fear, if it becomes brittle with age, it will break too easily. Only time will tell. A small lock piece pops out to provide room for your finger to lift the defuser lens out for installation. The lens has a groove moulding into the long edges to engages the base but, when I went to put that little plastic lock piece back in, I couldn't find it! It has to be here, but it is small enough to easily disappear. Eventually, I'm such I'll find and lock the defuser in place. The base has lots of key-hole style mounting spots, and two ½" knock-outs for bringing in the service wires. One near the fixtures center, and the other near the end opposite the controls. Three push-in wire connectors are included, making the electrical hookup very easy. To keep the wire leads from blocking the led elements, I looped the excess wires cinching them with a cable tie and tucked them out of the way. Since I was installing this in a very dark, unlit section of our 1857 basement with rough hewn joists (uneven) on three foot centers, I first mounted the fixture to piece of scrap plywood cut a little wider than the fixture, and then mounted that to the joists. The PIR sensor, passive infrared, senses heat, such as from a person and turns on the light. A switch give the option of delaying turning the light off by two or ten minutes - or disabling the sensor control all together (useful if you prefer to control the light with an external switch. It is sensitive enough that heat from electrical tools was enough to keep the on for a long time, until the tool cooled. I'm really happy with the installation and how this lamp illuminates this section of our basement.
        by
        1 found this review helpful
        Motion Detection LED great for shop
        The Commercial Electric 4ft Motion Activated 3600 Lumens LED shop light is going near my side door in my shop. I was planning on putting on a ceiling, but with the motion activation, I think putting it on the wall near my walk door is better. The motion activation can be 2 or 10 minutes. That give you time to find the other light switches. Motion can be deactivated as well. Commercial Elec has started using push elec. connectors which is so much better than the wire nuts. This is a great light with multiple uses.
        by
        • Recommended
        Great utility light with motion detector garage, workshop or storage area
        I installed this light in a basement storage area that previously was lit by a CFL bulb. Wow! What a difference in light level. Instant on and really bright. Fixture is easy to install and factory programming worked perfectly for my application. Only took 15 minutes to complete the installation. I will install more as needed in other areas of my home.
        by
        • Recommended
        One bright single strip light.
        This little light of mine puts out a shine that will top all the others. The simple fact that it is flush mounted gets rid of those unsightly chains that collect cobwebs and swaying the breeze with hypnotic results. After removing from the box and inventorying the contents all systems were on go. Prepare the fixture by prepping the knock out and pull your current wires thru. Then secure with the included screws and inserts. My installation was even simpler as my ceilings are plywood so that was no problem. The simplicity continues with the wire connections. They are the newer push types that are the new age of connectors. Just take your current black and white wires and strip the ends as per the instructions and push into the indicated slots. Check to make sure the wire is seated prior to moving on to the next one. Then place the cover and secure. There is great diffusing properties so the single light strip covers that the strip is many single LEDS all in a row. This may take some agility as there are several slots and tabs to work thru. Then let there be light. There are some settings to deal with as there is an added feature of a variable motion detector or as I have done an set it to always on and used with my wall switch. The appearance is so much better than having chains and cords all over the place. There will be more of these in the future as the trial of this one fixture is much more that I had expected.
        by
        • Recommended
        1 found this review helpful
        The Motion Sensor is nice
        I really like my Commercial Electric low profile four foot shop light. It has 3600 lumens and an integrated LED white wraparound light. I sure like the motion sensor because you can adjust it so the light stays on for 2 minutes, 10 minutes or the motion detector can be turned off too. It has 4000K bright white color temperature of light output. I did not want to hard wire it so I went to my local Home Depot & bought a short cord and a grommet and some wire nuts. It was easy to drill a hole for the grommet and install it so the cord does not get damaged. I install the LED light above my workbench in my garage. Its nice to have it come on with motion. Its maintenance free with no bulbs to replace and has a five year warranty. The cover that goes on was a real pain to remove and to install. Other than that its a pretty good light and it should last a long time.
        by
        • Recommended
        Showing 1-10 of 95 reviews

        Compare Similar Items