Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Give your home a beautiful new look with this Montauk Black Floor and Wall Tile. It features a unique gray and black stone design that is perfect for bathrooms, kitchens, floors and more. It can be used in residential and commercial use inside or outside. Note: Please inspect all tiles before installation, as natural stone products inherently lack uniformity and are subject to variation in color, shade and finish, so it is recommended to blend tiles from different boxes when installing. Natural stones may be characterized by dry seams and pits that are often filled. The filling can work its way out, and it may be necessary to refill these voids as part of a normal maintenance procedure. All natural stone products should be sealed with a penetrating sealer.
Approximate Tile Size | 24x24 | Product Length (in.) | 24 in |
---|---|---|---|
Product Thickness (mm) | 10 mm | Product Width (in.) | 24 in |
Suggested Grout Line Size | 1/4 |
Application Location | Floor, Wall | Color Family | Black |
---|---|---|---|
Color/Finish | Montauk Black | Commercial / Residential | Commercial / Residential |
Edge Type | Flat | Exact Dry SCOF Rating | 1.1 |
Exact Wet SCOF Rating | 1 | Flooring and Tile Look | Stone Look |
Flooring Product Type | Slate Tile | Indoor/Outdoor | Indoor, Outdoor |
Location | Bathroom, Fireplace, Floor, Kitchen | Returnable | Non-Returnable |
Shower Floor Compatibility | Not Compatible | Style | Farmhouse, Mediterranean, Mission, Rustic |
Tile Features | Frost Resistant, Meets A.D.A. Requirements, Radiant/Underfloor Warming Heating | Tile Finish | Textured |
Tile Format | Standard | Tile Material | Slate |
Water Protection | No Water Protection |
Manufacturer Warranty | One-Year Limited Warranty |
---|
For outdoor installations over concrete using MSI Montauk Black Slate, the best practice is to use a stable, crack-free concrete base combined with a polymer-modified thin-set mortar. For added durability and to accommodate movement, consider an uncoupling membrane and/or a waterproofing membrane. Always ensure proper drainage, full mortar coverage, and regular sealing of the slate for long-term performance. Good luck with your project!
Yes, this 12x12 slate tile can fit your patio table’s square frames. Please make sure the frame can support the tile’s thickness and weight, and seal the slate for outdoor durability. We recommend working with a professional installer for best results. Good luck with your project!
Each tile measures 24 inches long by 24 inches wide, with a thickness of 0.44 inches. When 20 tiles are stacked together, the stack is about 8.8 inches tall. Adding an estimated 4 to 6 inches for the packaging and pallet base, the total height of the pallet comes to approximately 13.8 inches. For safety, it’s best to round this up to 14 inches. Good luck with your project!
This tile is manufactured in Brazil. Good luck with your project!
We recommend using a 1/4 in. x 3/8 in. U-notched trowel and a 1/4 in. grout line for best results. Good luck with your project!
This tile does not typically come pre-mounted in a herringbone layout on mesh backing. It is sold as individual loose tiles, which allows for flexibility in installation patterns—including herringbone—but the layout would need to be arranged manually during installation. Good luck with your project!
We recommend using a wet saw to cut this tile. If a specific cut can't be made with a wet saw, a 4-inch grinder can be used for curves, cutouts, or hard-to-reach angles. Good luck with your project!
After allowing your grout to dry for 24 hours, ensure the surface is clean and free of dirt. Apply a tile sealer, we recommend Internet SKU#202907686 and follow the manufacturer's instructions for the best results. Good luck with your project!
Viewing 1-8 of 709
3.9 out of 5