Professional results that a DIYer can be proud of begins with IRONFORCE by Nashua Premium Duct Tape. Created for professional applications and DIY projects alike, our durable 15 mil thick tape provides consistent, reliable performance every time. The only duct tape for all your project needs. IRONFORCE. Consistent, reliable performance every time.
Tape Length (yds.) | 35 | Tape Width (in.) | 1.89 |
---|---|---|---|
Thickness (mm) | .381 |
Color Family | Grays | Features | No Additional Features |
---|---|---|---|
Feet per roll | 105 | Kit | No |
Material | Cloth | Maximum application temperature (F) | 200 |
Maximum hold temperature (F) | 200 | Minimum application temperature (F) | 40 |
Minimum hold temperature (F) | 30 | Number of Rolls Included | 1 |
Pack Size | 1 | Returnable | 90-Day |
Tape Design | Silver |
A: If your dryer vent is ridgid metal or flexible metal then something like 3M foil tape is more appropriate. If you're just looking for something to attach a flex vent between the dryer and the wall metal dryer vent clamps would work best.
A: nope poor adhesion
A: Sure, in a pinch, but duct tape usually 'drys out,' becomes loose and detaches whereas tapes specifically made for dryer ducts hold and last longer, especially the foil tapes, which Home Depot sells several brands of that perform better. -IronForce All-Purpose Duct tape; Operating temperature 30 - 200 degrees F. -Nashua Tape 1.89 in. x 30 yd. -Dryer Vent Installation Tape; Minimum application temperature (F)-10, Maximum application temperature (F) 250, but more importantly Minimum hold temperature (F) -10 and a Maximum hold temperature (F) 250 So the dryer duct tapes have a greater temp rating but also last longer and are about the same price, some lower while the premium foil tapes cost more than IronForce All-Purpose.
A: At a minimum,duct tape will work on a dryer vent hose...but I'd suggest using aluminum foil tape that's made specifically for that uze
A: For direct furnace pipes (air in and out) they are generally plumbed with PCV schedule 40 (rated to 140F) rigid pipes and fittings, they are solvent welded. Under ATSM (International Technical Technical Standards) consider PVC 'combustible'. It softens / melts about 220F, and looses structural integrity. I checked a small piece of this tape by lighting the edge with a match it will burn and sustain a flame, it does not self extinguish. I use it for HVAC air ducts to seal the joints.
A: i have no idea. one thing for sure the tape runs away because it doesn't stick. that would make it resistant to fire because it comes off as soon as you put it on
A: No. Operating temp. 30 - 200 degrees F. (stated in the installation / assembly guide) There are much better tapes, like the foil tapes, but any has to be rated for use used regarding heat venting.
A: no
A: I don't think it is resistant to fire. I didn't buy for that purpose, so can't say for sure?
A: I would never use this type of tape on chimney vent pipes.
A: No it sure s about fire resistant I would Contact the manufacturer direct! It’s sticks to stucco for sure and is very strong
A: It may work but if it were me, I would use the underwater tape they advertise on TV. It can be applied under water. Regular duct tape is not meant for that purpose.
A: No. For a vinyl pool use a vinyl repair kit. Should be in the pool area at Home Depot.
A: I liked it because it is super strong and super sticky and it sticks to the floor really good
A: No
A: It appears that way because it's very sticky
4.4 out of 5
5
384
4
87
3
33
2
20
1
33
current item | |||
Features | |||
---|---|---|---|
No Additional Features | No Additional Features | No Additional Features | No Additional Features |
Professional results that a DIYer can be proud of begins with Aqua-Seal Tape by Nashua. This tape seals and protects a wide range of surfaces in both wet and dry conditions. Ideal for use on multiple surfaces including: gutters, galvanized pipes, vinyl siding, aluminum, glass, and wood. Nashua Tape. Trusted by professionals. DIY approved. Count on Nashua to get the job done right.
Professional results that a DIYer can be proud of begins with 555 FlexFix UL Listed Tape by Nashua. This UL Listed tape is highly conformable to flexible connections in HVAC applications. It provides an economical solution for sealing flexible duct, bubble wrap, and reflective insulation materials. Nashua Tape. Trusted by professionals. DIY approved. Count on Nashua to get the job done right.
Professional results that a DIYer can be proud of begins with 398 All-Weather Duct Tape by Nashua. At 11 mils thick, this duct tape offers durability and excellent outdoor performance in all weather conditions. Great for challenging household maintenance and repairs. Nashua Tape. Trusted by professionals. DIY approved. Count on Nashua to get the job done right.
Professional results that a DIYer can be proud of begins with 394 General Purpose Duct Tape by Nashua. This duct tape measures 9 mils thick while delivering value and performance, making it the perfect choice for common household repair applications. Suitable for seaming, patching, bundling and sealing, it bonds to a variety of both rough and smooth surfaces for versatile use. Nashua Tape. Trusted by professionals. DIY approved. Count on Nashua to get the job done right.
Explore More on homedepot.com
How can we help?