Questions and Answers for 1/2 in. x 20 ft. #4 Rebar

A:  Attached is a rebar spec sheet for you. Typically the specification sheets aren't requested because they are boilerplate, it's the mill certificates that are requested; you will receive this with the delivery of your order. Hope this helps

A:  1 piece, 20ft long, 1/2 in thick

A:  The discription says it is grade 40 steel. So no it?s not 60 grade

A:  No

A:  The store sells pre-cut lengths, but I don't think they custom cut from this 20' one.

A:  Why not if you can eat a rebar.

A:  Very good if your iron levels are low.

A:  If you were going to buy a bundle it would contain 152 pieces. Since 152 > 60 you would get them at the current advertised "bulk" price. If you buy less than 60 pieces you would buy them at the current advertised price. In short, the bundle size should not concern you THD will sell you whatever you want as long as you can pay for it.

A:  Each one is 240 inches yes 20 ft.

A:  It probably comes in a bundle of 152 to the store, but you buy them per piece @ $11 each for the 20' length.

A:  My minivan can haul it, if it's 10' max. I connected a power inverter to it and plugged a small cutoff wheel. It only took a couple minutes cutting it in the parking lot. Bought this item several times using the same method. The other option would be using a rebar cutter, which I don't have.

A:  I took a cordless Sawzall and cut them in half And even then it was a tight fit

A:  Probably fits This a 10' long rebar, measure from the windshield to the back of your car just becare whit your seats and the glass of your car and gave at least 6" clearance between the windshield and the back window.

A:  If you're going to transport as a 20' piece you should have a trailer for safety's sake. If you have a cordless angle grinder you could purchase and cut in half in the parking lot.

A:  No. You will have to cut it if you want to haul it in or on an SUV.

A:  ask store manager

A:  Hello, Roberto. Thank you for your recent inquiry with The Home Depot the 1/2 in. x 20 ft. #4 Rebar. This item is a Store Exclusive and is available for purchase in select stores only. It includes one piece of 1/2 in. diameter grade 40 steel cut to 20 ft. length. To determine pricing and availability localize the item online by using a zip code. 1. Localize Homedepot.com using your zip code (My Store Location: Change) 2. Choose the store where you want to pick up the item (Make this my Store) Unfortunately, if you are unable to see store inventory this is not a stocked item in your area. You may also find it helpful to call or stop by your local Home Depot store to check availability. For any other questions, please call HomeDepot.com Customer Service at 800-430-3376. Thank you for shopping Home Depot.

A:  One