Questions and Answers for Acurio Latticeworks Moors Ellipses 4 ft. x 32 in. White Vinyl Decorative Screen Panel

A:  I used black zip ties to connect they blended in pretty well and cut off end of ties

A:  Acurio does not offer a kit to combine panels. However, Acurio offers a large selection of larger panels that can be ordered through the Home Depot Pro Desk.

A:  Yes, Acurio panels are paintable. PVC is an inert, static material with minimal response to environmental conditions (water, sun, etc.) which makes it an excellent material for paint. The material has a matte finish which aids in paint adhesion. Though no surface preparation is absolutely necessary, it is recommended that the surface be cleaned with isopropyl alcohol or acetone just in case dirt or unseen oil is present. Wipe with a soaked cloth and quickly wipe away any excess cleaning solution. Lightly sanding the surface may be beneficial though this may leave unsightly sanding scratches that can be seen if applying light coats of spray paint (not so much if using a brush). Buffing with an orbit buffer is an option. Use micro poly-fiber pads. Paint: Use a quality interior or exterior latex, vinyl or acrylic lacquer paint (do not use oil based paints). Priming prior to painting is only necessary if required by the paint manufacture.

A:  Acurio Lattice panels do not come pre-drilled but can be screwed through to attach to a wall.

A:  Acurio lattice panels are meant to be purely aesthetic. The panels should not be installed and used as a structural component.

A:  Acurio Lattice panels cut with standard wood working tools. A circular saw with a carbide tipped blade will work just fine.

A:  Yes. We cut ours with a jog saw (though circular saw worked, just less precise). A table saw could make the cuts much straighter.

A:  Our lattice panels can be used in many different custom applications. This will require framing the panels in between posts. We recommend contacting a contractor for more specific details.

A:  Horizontally in this context means overhead such as a pergola top.

A:  Hi Tyson, Our panels are made with a 1- 1/2" border all the way around. They are part of the panel and not in addition to the size. It is not necessary to add a cap unless you want to. let us know if you have any other questions. Thank you, Acurio Lattice