Q:How big is the shoulder on the head of the screw?
by|May 16, 2024
1 Answer
Answer This Question
A: Hi Dave, this is Stacy from Simpson Strong-Tie. Thank you for your question about the SD Connector Screw #9 x 1-1/2". There is a 1/4" hex head with 0.370"-dia. integrated washer base; just shy of 3/8". If you have more questions, please contact our customer service team at (800)999-5099. We look forward to hearing from you!
by|May 16, 2024
Q:Simpson: Are you aware the QUANTITY is no where near "100" as stated on box and on web page details? I counted ~48 in box. Box was almost full so there is no way 100 would fit in it.
by|May 13, 2024
1 Answer
Answer This Question
A: Hello ELJay, this is Stacy with Simpson Strong-Tie. As mentioned in the response to your review, this is a mistake and we want to rectify it. Please contact the Home Depot Customer Service 1-800-466-3337 to get a replacement from Simpson Strong-Tie.
by|May 13, 2024
Q:Truss clips calls for #8d common nail 2-1/2" long. Will I still remain within Florida Code using these screws?
by|Jan 2, 2024
1 Answer
Answer This Question
A: Hello nonrev321, this is Ricardo with Simpson Strong-Tie. Please consult with the local building code official to find this information. If you have any other questions please contact us at 800/999/5099.
by|Jan 3, 2024
Q:Are these good to install gutter hangers? The hangers require 1.5 screws
by|Nov 16, 2023
1 Answer
Answer This Question
A: Andy, this is McKenzie from Simpson Strongtie. The SDS screws may work for your gutter install, if you go to the SDS landing page on our website you can look at our test values to make sure it works for your application.
Thanks.
by|Nov 17, 2023
Q:Will these work with joist hangers LUS26Z?
by|Nov 12, 2023
1 Answer
Answer This Question
A: Kwileyf, this is McKenzie from Simpson Strongtie. We have a call out on our website for 4 SD9112 into the header, and 4 SD9212 into the joist.
Thanks,
by|Nov 13, 2023
Q:What are the correct fasteners for the huc210-2z
by|Nov 2, 2023
1 Answer
Answer This Question
A: Hi, this is Stacy with Simpson Strong-Tie. The HUC210-2 uses (18) 0.162" x 3 1/2" fasteners to the header, and (10) 0.148" x 3" fasteners to the Joist. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.
by|Nov 3, 2023
Q:Can I use 1 1/2 sd screw to secure a hanger to a 2x8 pressure treated ridge board. Thnx
by|Oct 19, 2023
1 Answer
Answer This Question
A: Hi Denn, this is McKenzie from Simpson Strongtie. We do have hangers that has an option to use screws instead of nails on some of our hangers. Please give our customer service team a call so we can better assist you with your application.
Thanks.
by|Oct 20, 2023
Q:Can I use these with the LSC 18 Gauge zmax galvanized adjustable stringer connector
by|Sep 10, 2023
1 Answer
Answer This Question
A: Hi John, thank you for your message. The LSC is designed to be used specifically for stair-stringer connections for pitches and lumber sizes found in the load tables in the link below. You will want to make sure the load values will meet or exceed your load requirements for proceeding. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.
https://www.strongtie.com/decks_decksandfences/lsc_connect/p/lsc